[N3EMC]

Any update or suggestions as to what I should check or trouble shoot? I still can’t get PSK reporter to work.

[N3EMC]

One other thing I tried was to put in different callsigns of people that I know were active at the same time I was on ft8 and were showing on PSK Reporter as active into Helioclock replacing my callsign. None of those showed up in Heliclock as reported on PSK Reporter.

[N3EMC]

Thanks for the reply,

The time seems ok on Helioclock’s end i.e the time at the top of the screen matches real time and NTP is syncing correctly according to the logs. If there is a time issue I’d lean more towards it being on psk reporter’s side.

I have been TX on FT8 for the past 2 hours on various bands and no joy with Helioclock showing anything so far. The log still shows the same message as I posted above but with current time stamps so it’s checking but isn’t receiving anything back or at least that is what it looks like to me. I can access pskreporter website from my network so I don’t think it’s a problem with DNS or networking from what I can tell. When I check the psk reporter site it shows my current spots for the last 2 hours and the last 24 hours.

What I’ve tried so far:

Removed my callsign from Helioclock and re-added it and saved the settings.
Removed the PSKreporter panel and layers and re-added them.
Refreshed the Helioclock webpage (I am accessing it with Chrome) several times with the hard reset listed in another post. ctr-shift-r
Tried removing everything except pskreporter panels and layers from helioclock in case something was interfering with it working.

What I’ve done to Helioclock and what I have running: (might be excessive but I figure the more I list the more it might help)
I added my GPS coordinates to the 6th digit. I noticed this might have broke AQI since I have an error message with AQI with those coordinates not being valid but that is a seperate issue and I don’t want add to this post.
Added my callsign in caps and in lowercase.
Changed it to display my callsign on the top left.
Changed font size to XXL
That is all of the changes I can think of that I made to the default settings
Left Panels:
Sunrise sunset
Planets
Earthquakes
Lightning Scope
Alert Scope
Weather

Right Panel:
PSK Reporter
DX Cluster – No changes to the setting inside
Best Band Now
WSJT-X
Prop Forecast

Layers:
NexRAD

NWS Watches and Warns
Trop Storms and Hurricanes
ISS Ground Track
NCDXF Beacons
PSK REPORTER
PSK REPORTER PATHS
Earthquakes

News feed:
Added a few RSS feeds and have a few of the default ones running. BTW I don’t think the AP feeds work anymore unless you’re getting them from somewhere besides AP. They seem to have stopped their RSS feeds recently.

These are the things I can remember that I’ve done to the default settings or customized for my use.

[Author]

Posts